Hand Pumps

Valley Hydraulics are manufacturers and suppliers of the Lodematic range of Single Acting Handpumps and Rampumps. 

Originally supplied by Nicholls of Newark, Lodematic purchased the manufacturing rights to these pumps in the late 1990’s And have been supplying these successfully ever since.

HP2LT Hand Pump

A rugged single acting hand pump suitable for pressures of up to 210 bar (3045 PSI).  The pump operates on both strokes of the handle with each double stroke giving 14cc of output.  Suitable for use with most mineral based oils this unit is easily mounted to any reservoir using the supplied cork sealing gasket.  A full range of spares are readily available from stock.

Click here to order

HP2 Hand Pump range

Incorporates the standard HP2LT hand pump that is mounted directly onto reservoirs with the following tank capacities available from stock. Available in 5 capacities: 1.0, 1.7, 3.4, 4.5 and 9.0 litre capacity tank.

Click here to order

SX Range of Ram Pumps

The SX Series Ram Pump combines a 38mm bore single acting cylinder and the rugged HP2LT Hand pump.  The modular construction eliminates the need for any external pipework. A maximum thrust of 2000kg @ 170 bar (2465 PSI) can be achieved with strokes available from 150mm up to 1000mm. This arrangement is ideally suited to tilt deck car transporters, plant trailers, conveyors or stacker trucks where the addition of a powered hydraulic unit is not possible.  The hard chrome plated piston rod and sealed unit provides the all-weather, heavy duty solution to your lifting problems.

Click here to order

Should you require something outside of this range do not hesitate to contact us to discuss your bespoke enquiry. Full spares can be sourced for all hand pumps and tanks dating back to the original Nicholls units! 

All prices are based upon ordering a quantity of 1-5 off for greater quantities contact us direct on 01200 440383.

All prices exclude carriage and VAT